The packer Suppliers - KERUI

Product sales hotline:+86939 4465557

Check Valve for Water Well

                           Check Valve for Water Well
1. Application

It’s installed on the injection pump wellhead. It’s a device that filtering mechanical impurity, such as oil contamination and suspended solids in the injection water.

 

2. Structure and Work Principle

Check valve is mainly composed of the followings parts: 1. plug 2. Spring 3. Metal valve ball  4. Inlet  5. Filter tube  6. Cleaning plug  7. Outlet

As shown in figure, the structure can be divided into two parts: 1.plugging parts: it is composed of metal valve ball, spring and plug; 2. body: it consists of right angle pipe fittings.

When injecting water, water flow into check valve from pipeline on the ground and then flow into main part. Water flows right after filtered to push the valve ball move right to show the channel. The water flows in well from outlet. When the injection is stopped because of fault, the valve ball returns back to seat by elastic force. Close the channel to prevent the water back to pipeline to ensure there is no sanding and the injection can be started smoothly to avoid economic loss caused by stopping injection.

 

3. Characteristics

Check valve has simple structure, high pressure-bearing and cleaning online characteristics.

   Product address:http://en.pykrgs.com/peijian/422.html